'I2C not detecting INA219 device
I connected a INA219 to a raspberry pi and measuring current with it with an external shunt. It worked fine when i set it up for the first time but a few days ago it stopped working. I tried i2cdetect -y 1 but no devices show up on the adress table. I also made sure the soldering was good by soldering it once again but that still didn't work. I2C is enabled in raspi-config by the way.
I also tried to create a new i2c bus in the /boot/config.txt file on other pins but that didn't work too. Am i missing something here? Help is much appreciated.
Sources
This article follows the attribution requirements of Stack Overflow and is licensed under CC BY-SA 3.0.
Source: Stack Overflow
| Solution | Source |
|---|