'Is it safe to clean docker/overlay2/
I got some docker containers running on AWS EC2, the /var/lib/docker/overlay2 folder grows very fast in disk size.
I'm wondering if it is safe to delete its content? or if docker has some kind of command to free up some disk usage.
UPDATE:
I actually tried docker system prune -a already, which reclaimed 0Kb.
Also my /docker/overlay2 disk size is much larger than the output from docker system df
After reading docker documentation and BMitch's answer, I believe it is a stupid idea to touch this folder and I will try other ways to reclaim my disk space.
Solution 1:[1]
Docker uses /var/lib/docker to store your images, containers, and local named volumes. Deleting this can result in data loss and possibly stop the engine from running. The overlay2 subdirectory specifically contains the various filesystem layers for images and containers.
To cleanup unused containers and images, see docker system prune. There are also options to remove volumes and even tagged images, but they aren't enabled by default due to the possibility of data loss:
$ docker system prune --help
Usage: docker system prune [OPTIONS]
Remove unused data
Options:
-a, --all Remove all unused images not just dangling ones
--filter filter Provide filter values (e.g. 'label=<key>=<value>')
-f, --force Do not prompt for confirmation
--volumes Prune volumes
What a prune will never delete includes:
- running containers (list them with
docker ps) - logs on those containers (see this post for details on limiting the size of logs)
- filesystem changes made by those containers (visible with
docker diff)
Additionally, anything created outside of the normal docker folders may not be seen by docker during this garbage collection. This could be from some other app writing to this directory, or a previous configuration of the docker engine (e.g. switching from AUFS to overlay2, or possibly after enabling user namespaces).
What would happen if this advice is ignored and you deleted a single folder like overlay2 out from this filesystem? The container filesystems are assembled from a collection of filesystem layers, and the overlay2 folder is where docker is performing some of these mounts (you'll see them in the output of mount when a container is running). Deleting some of these when they are in use would delete chunks of the filesystem out from a running container, and likely break the ability to start a new container from an impacted image. See this question for one of many possible results.
To completely refresh docker to a clean state, you can delete the entire directory, not just sub-directories like overlay2:
# danger, read the entire text around this code before running
# you will lose data
sudo -s
systemctl stop docker
rm -rf /var/lib/docker
systemctl start docker
exit
The engine will restart in a completely empty state, which means you will lose all:
- images
- containers
- named volumes
- user created networks
- swarm state
Solution 2:[2]
I found this worked best for me:
docker image prune --all
By default Docker will not remove named images, even if they are unused. This command will remove unused images.
Note each layer in an image is a folder inside the /usr/lib/docker/overlay2/ folder.
Solution 3:[3]
I had this issue... It was the log that was huge. Logs are here :
/var/lib/docker/containers/<container id>/<container id>-json.log
You can manage this in the run command line or in the compose file. See there : Configure logging drivers
I personally added these 3 lines to my docker-compose.yml file :
my_container:
logging:
options:
max-size: 10m
Solution 4:[4]
also had problems with rapidly growing overlay2
/var/lib/docker/overlay2 - is a folder where docker store writable layers for your container.
docker system prune -a - may work only if container is stopped and removed.
in my i was able to figure out what consumes space by going into overlay2 and investigating.
that folder contains other hash named folders. each of those has several folders including diff folder.
diff folder - contains actual difference written by a container with exact folder structure as your container (at least it was in my case - ubuntu 18...)
so i've used du -hsc /var/lib/docker/overlay2/LONGHASHHHHHHH/diff/tmp to figure out that /tmp inside of my container is the folder which gets polluted.
so as a workaround i've used -v /tmp/container-data/tmp:/tmp parameter for docker run command to map inner /tmp folder to host and setup a cron on host to cleanup that folder.
cron task was simple:
sudo nano /etc/crontab*/30 * * * * root rm -rf /tmp/container-data/tmp/*save and exit
NOTE: overlay2 is system docker folder, and they may change it structure anytime. Everything above is based on what i saw in there. Had to go in docker folder structure only because system was completely out of space and even wouldn't allow me to ssh into docker container.
Solution 5:[5]
Backgroud
The blame for the issue can be split between our misconfiguration of container volumes, and a problem with docker leaking (failing to release) temporary data written to these volumes. We should be mapping (either to host folders or other persistent storage claims) all of out container's temporary / logs / scratch folders where our apps write frequently and/or heavily. Docker does not take responsibility for the cleanup of all automatically created so-called EmptyDirs located by default in /var/lib/docker/overlay2/*/diff/*. Contents of these "non-persistent" folders should be purged automatically by docker after container is stopped, but apparently are not (they may be even impossible to purge from the host side if the container is still running - and it can be running for months at a time).
Workaround
A workaround requires careful manual cleanup, and while already described elsewhere, you still may find some hints from my case study, which I tried to make as instructive and generalizable as possible.
So what happened is the culprit app (in my case clair-scanner) managed to write over a few months hundreds of gigs of data to the /diff/tmp subfolder of docker's overlay2
du -sch /var/lib/docker/overlay2/<long random folder name seen as bloated in df -haT>/diff/tmp
271G total
So as all those subfolders in /diff/tmp were pretty self-explanatory (all were of the form clair-scanner-* and had obsolete creation dates), I stopped the associated container (docker stop clair) and carefully removed these obsolete subfolders from diff/tmp, starting prudently with a single (oldest) one, and testing the impact on docker engine (which did require restart [systemctl restart docker] to reclaim disk space):
rm -rf $(ls -at /var/lib/docker/overlay2/<long random folder name seen as bloated in df -haT>/diff/tmp | grep clair-scanner | tail -1)
I reclaimed hundreds of gigs of disk space without the need to re-install docker or purge its entire folders. All running containers did have to be stopped at one point, because docker daemon restart was required to reclaim disk space, so make sure first your failover containers are running correctly on an/other node/s). I wish though that the docker prune command could cover the obsolete /diff/tmp (or even /diff/*) data as well (via yet another switch).
It's a 3-year-old issue now, you can read its rich and colorful history on Docker forums, where a variant aimed at application logs of the above solution was proposed in 2019 and seems to have worked in several setups: https://forums.docker.com/t/some-way-to-clean-up-identify-contents-of-var-lib-docker-overlay/30604
Solution 6:[6]
Friends, to keep everything clean you can use de commands:
docker system prune -a && docker volume prune
Solution 7:[7]
WARNING: DO NOT USE IN A PRODUCTION SYSTEM
/# df
...
/dev/xvda1 51467016 39384516 9886300 80% /
...
Ok, let's first try system prune
#/ docker system prune --volumes
...
/# df
...
/dev/xvda1 51467016 38613596 10657220 79% /
...
Not so great, seems like it cleaned up a few megabytes. Let's go crazy now:
/# sudo su
/# service docker stop
/# cd /var/lib/docker
/var/lib/docker# rm -rf *
/# service docker start
/var/lib/docker# df
...
/dev/xvda1 51467016 8086924 41183892 17% /
...
Nice! Just remember that this is NOT recommended in anything but a throw-away server. At this point Docker's internal database won't be able to find any of these overlays and it may cause unintended consequences.
Solution 8:[8]
DON'T DO THIS IN PRODUCTION
The answer given by @ravi-luthra technically works but it has some issues!
In my case, I was just trying to recover disk space. The lib/docker/overlay folder was taking 30GB of space and I only run a few containers regularly. Looks like docker has some issue with data leakage and some of the temporary data are not cleared when the container stops.
So I went ahead and deleted all the contents of lib/docker/overlay folder. After that, My docker instance became un-useable. When I tried to run or build any container, It gave me this error:
failed to create rwlayer: symlink ../04578d9f8e428b693174c6eb9a80111c907724cc22129761ce14a4c8cb4f1d7c/diff /var/lib/docker/overlay2/l/C3F33OLORAASNIYB3ZDATH2HJ7: no such file or directory
Then with some trial and error, I solved this issue by running
(WARNING: This will delete all your data inside docker volumes)
docker system prune --volumes -a
So It is not recommended to do such dirty clean ups unless you completely understand how the system works.
Solution 9:[9]
adding to above comment, in which people are suggesting to prune system like clear dangling volumes, images, exit containers etc., Sometime your app become culprit, it generated too much logs in a small time and if you using an empty directory volume (local volumes) this fill the /var partitions. In that case I found below command very interesting to figure out, what is consuming space on my /var partition disk.
du -ahx /var/lib | sort -rh | head -n 30
This command will list top 30, which is consuming most space on a single disk. Means if you are using external storage with your containers, it consumes a lot of time to run du command. This command will not count mount volumes. And is much faster. You will get the exact directories/files which are consuming space. Then you can go to those directories and check which files are useful or not. if these files are required then you can move them to some persistent storage by making change in app to use persistent storage for that location or change location of that files. And for rest you can clear them.
Solution 10:[10]
"Official" answer, cleaning with "prune" commands, does not clean actually garbage in overlay2 folder.
So, to answer the original question, what can be done is:
Disclaimer: Be careful when applying this. This may result broking your Docker object!
- List folder names (hashes) in
overlay2 - Inspect your Docker objects (images, containers, ...) that you need (A stopped container or an image currently not inside any container do not mean that you do not need them).
- When you inspect, you will see that it gives you the hashes that are related with your object, including
overlay2's folders. - Do
grepagainstoverlay2's folders - Note all folders that are found with
grep - Now you can delete folders of
overlay2that are not referred by any Docker object that you need.
Example:
Let say there are these folders inside your overlay2 directory,
a1b28095041cc0a5ded909a20fed6dbfbcc08e1968fa265bc6f3abcc835378b5
021500fad32558a613122070616963c6644c6a57b2e1ed61cb6c32787a86f048
And what you only have is one image with ID c777cf06a6e3.
Then, do this:
docker inspect c777cf06a6e3 | grep a1b2809
docker inspect c777cf06a6e3 | grep 021500
Imagine that first command found something whereas the second nothing.
Then, you can delete 0215... folder of overlay2:
rm -r 021500fad32558a613122070616963c6644c6a57b2e1ed61cb6c32787a86f048
To answer the title of question:
- Yes, it is safe deleting dxirectly overlay2 folder if you find out that it is not in use.
- No, it is not safe deleting it directly if you find out that it is in use or you are not sure.
Solution 11:[11]
Everything in /var/lib/docker are filesystems of containers. If you stop all your containers and prune them, you should end up with the folder being empty. You probably don't really want that, so don't go randomly deleting stuff in there. Do not delete things in /var/lib/docker directly. You may get away with it sometimes, but it's inadvisable for so many reasons.
Do this instead:
sudo bash
cd /var/lib/docker
find . -type f | xargs du -b | sort -n
What you will see is the largest files shown at the bottom. If you want, figure out what containers those files are in, enter those containers with docker exec -ti containername -- /bin/sh and delete some files.
You can also put docker system prune -a -f on a daily/weekly cron job as long as you aren't leaving stopped containers and volumes around that you care about. It's better to figure out the reasons why it's growing, and correct them at the container level.
Solution 12:[12]
Docker apparently keeps image layers of old versions of an image for running containers. It may happen if you update your running container's image (same tag) without stopping it, for example:
docker-compose pull
docker-compose up -d
Running docker-compose down before updating solved it, the downtime is not an issue in my case.
Solution 13:[13]
I had the same problem, in my instance it was because ´var/lib/docker´ directory was mounted to a running container (in my case google/cadvisor) therefore it blocked docker prune from cleaning the folder. Stopping the container, running docker prune -and then rerunning the container solved the problem.
Solution 14:[14]
I recently had a similar issue, overlay2 grew bigger and bigger, But I couldn’t figure out what consumed the bulk of the space.
df showed me that overlay2 was about 24GB in size.
With du I tried to figure out what occupied the space… and failed.
The difference came from the fact that deleted files (mostly log files in my case) where still being used by a process (Docker). Thus the file doesn’t show up with du but the space it occupies will show with df.
A reboot of the host machine helped. Restarting the docker container would probably have helped already… This article on linuxquestions.org helped me to figure that out.
Solution 15:[15]
If your system is also used for building images you might have a look at cleaning up garbage created by the builders using:
docker buildx prune --all
and
docker builder prune --all
Solution 16:[16]
Maybe this folder is not your problem, don't use the result of df -h with docker.
Use the command below to see the size of each of your folders:
echo; pwd; echo; ls -AlhF; echo; du -h --max-depth=1; echo; du-sh
Solution 17:[17]
docker system prune -af && docker image prune -af
Sources
This article follows the attribution requirements of Stack Overflow and is licensed under CC BY-SA 3.0.
Source: Stack Overflow