Cutting the videos based on start and end time using ffmpeg

Question

I tried to cut the video using the start and end time of the video by using the following command

ffmpeg -ss 00:00:03 -t 00:00:08 -i movie.mp4 -acodec copy -vcodec copy -async 1 cut.mp4

By using the above command i want to cut the video from 00:00:03 to 00:00:08. But it is not cutting the video between those times instead of that it is cutting the video with first 11 seconds. can anyone help me how resolve this?

Edit 1:

I have tried to cut by using the following command which is suggested by mark4o

ffmpeg -i movie.mp4 -ss 00:00:03 -t 00:00:08 -async 1 cut.mp4

But it was shown the following error.

the encoder 'aac' is experimental but experimental codecs are not enabled

so i added the -strict -2 into the command i.e.,

ffmpeg -i movie.mp4 -ss 00:00:03 -t 00:00:08 -async 1 -strict -2 cut.mp4

Now it is working fine.

Answer 1

Try using this. It is the fastest and best ffmpeg-way I have figure it out:

 ffmpeg -ss 00:01:00 -to 00:02:00  -i input.mp4 -c copy output.mp4

This command trims your video in seconds!

Explanation of the command:

-i: This specifies the input file. In that case, it is (input.mp4).
-ss: Used with -i, this seeks in the input file (input.mp4) to position.
00:01:00: This is the time your trimmed video will start with.
-to: This specifies duration from start (00:01:40) to end (00:02:12).
00:02:00: This is the time your trimmed video will end with.
-c copy: This is an option to trim via stream copy. (NB: Very fast)

The timing format is: hh:mm:ss

Please note that the current highly upvoted answer is outdated and the trim would be extremely slow. For more information, look at this official ffmpeg article.

Answer 2

ffmpeg -i movie.mp4 -ss 00:00:03 -t 00:00:08 -async 1 -c copy cut.mp4 

Use -c copy for make in instantly. In that case ffmpeg will not re-encode video, just will cut to according size.

Answer 3

Here's what I use and will only take a few seconds to run:

ffmpeg -i input.mp4 -ss 01:19:27 -to 02:18:51 -c:v copy -c:a copy output.mp4

Reference: Trim video files using FFmpeg by Alexander Refsum Jensenius.

---

Generated mp4 files could also be used in iMovie. More info related to get the full duration using get_duration(input_video) model.

If you want to concatenate multiple cut scenes you can use following Python script:

#!/usr/bin/env python3

import subprocess

def get_duration(input_video):
    cmd = ["ffprobe", "-i", input_video, "-show_entries", "format=duration",
           "-v", "quiet", "-sexagesimal", "-of", "csv=p=0"]
    return subprocess.check_output(cmd).decode("utf-8").strip()


def main():
    name = "input.mkv"
    times = []
    times.append(["00:00:00", "00:00:10"])
    times.append(["00:06:00", "00:07:00"])
    # times = [["00:00:00", get_duration(name)]]
    if len(times) == 1:
        time = times[0]
        cmd = ["ffmpeg", "-i", name, "-ss", time[0], "-to", time[1], "-c:v", "copy", "-c:a", "copy", "output.mp4"]
        subprocess.check_output(cmd)
    else:
        open('concatenate.txt', 'w').close()
        for idx, time in enumerate(times):
            output_filename = f"output{idx}.mp4"
            cmd = ["ffmpeg", "-i", name, "-ss", time[0], "-to", time[1], "-c:v", "copy", "-c:a", "copy", output_filename]
            subprocess.check_output(cmd)

            with open("concatenate.txt", "a") as myfile:
                myfile.write(f"file {output_filename}\n")

        cmd = ["ffmpeg", "-f", "concat", "-i", "concatenate.txt", "-c", "copy", "output.mp4"]
        output = subprocess.check_output(cmd).decode("utf-8").strip()
        print(output)


if __name__ == "__main__":
    main()

Example script will cut and merge scenes in between 00:00:00 - 00:00:10 and 00:06:00 - 00:07:00.

---

If you want to cut the complete video (in case if you want to convert mkv format into mp4) just uncomment the following line:

# times = [["00:00:00", get_duration(name)]]

Answer 4

    ffmpeg -i movie.mp4 -vf trim=3:8 cut.mp4

Drop everything except from second 3 to second 8.

Answer 5

new answer (fast)

You can make bash do the math for you, and it works with milliseconds.

toSeconds() {
    awk -F: 'NF==3 { print ($1 * 3600) + ($2 * 60) + $3 } NF==2 { print ($1 * 60) + $2 } NF==1 { print 0 + $1 }' <<< $1
}

StartSeconds=$(toSeconds "45.5")
EndSeconds=$(toSeconds "1:00.5")
Duration=$(bc <<< "(${EndSeconds} + 0.01) - ${StartSeconds}" | awk '{ printf "%.4f", $0 }')
ffmpeg -ss $StartSeconds -i input.mpg -t $Duration output.mpg

This, like the old answer, will produce a 15 second clip. This method is ideal even when clipping from deep within a large file because seeking isn't disabled, unlike the old answer. And yes, I've verified it's frame perfect.

NOTE: The start-time is INCLUSIVE and the end-time is normally EXCLUSIVE, hence the +0.01, to make it inclusive.

If you use mpv you can enable millisecond timecodes in the OSD with --osd-fractions

---

old answer with explanation (slow)

To cut based on start and end time from the source video and avoid having to do math, specify the end time as the input option and the start time as the output option.

ffmpeg -t 1:00 -i input.mpg -ss 45 output.mpg

This will produce a 15 second cut from 0:45 to 1:00.

This is because when -ss is given as an output option, the discarded time is still included in the total time read from the input, which -t uses to know when to stop. Whereas if -ss is given as an input option, the start time is seeked and not counted, which is where the confusion comes from.

It's slower than seeking since the omitted segment is still processed before being discarded, but this is the only way to do it as far as I know. If you're clipping from deep within a large file, it's more prudent to just do the math and use -ss for the input.

Answer 6

Use -to instead of -t: -to specifies the end time, -t specifies the duration

Answer 7

My setup:

$ ffmpeg
ffmpeg version 4.4 Copyright (c) 2000-2021 the FFmpeg developers
  built with Apple clang version 12.0.5 (clang-1205.0.22.9)

I found that the order of the switches matters. If -i is not between -ss and -t then I got about 3-seconds leading blank in the result.

So whatever additional switches you use, make sure you got those three switches in the correct order, like this

ffmpeg -ss 00:00:03 -i movie.mp4 -t 00:00:08 cut.mp4

Answer 8

feel free to use this tool https://github.com/rooty0/ffmpeg_video_cutter I wrote awhile ago Pretty much that's cli front-end for ffmpeg... you just need to create a yaml what you want to cut out... something like this

cut_method: delete  # we're going to delete following video fragments from a video
timeframe:
  - from: start   # waiting for people to join the conference
    to: 4m
  - from: 10m11s  # awkward silence
    to: 15m50s
  - from: 30m5s   # Off-Topic Discussion
    to: end

and then just run a tool to get result

Answer 9

First, a video should be coded using ffvhuff encoder so that the video could be cut to exactly at the start and end time. Normally, with other commands given above, it may be possible that the video is not cut to the specific duration as not every frame is an intra coded frame.

ffmpeg -ss 00:03:00 -i input_file.mkv -t 00:01:19 -c:v ffvhuff -pix_fmt yuv420p -y output_file.mkv

Answer 10

I was interested in cut times based on milliseconds, and noticed that seconds (and fractions of them) can be specified for the cut as follows:

ffmpeg -i input.mp4 -ss 17.5 -to 20.5 output.mp4

For a duration rather than an end time, use -t instead of -to:

ffmpeg -i input.mp4 -ss 17.5 -t 3 output.mp4