'Mongodb v4.0 Transaction, MongoError: Transaction numbers are only allowed on a replica set member or mongos

I've installed MongoDB v4.0 for the most amazing feature of it Transaction in Nodejs with mongodb 3.1 as a driver.

When I try to use a transaction session I've faced this error:

MongoError: Transaction numbers are only allowed on a replica set member or mongos.

What's that and how can I get rid of it?

Any suggestion is appreciated.

Solution 1:^[1]

I got the solution, and it's just three lines configuration inside the MongoDB config file.

After switching from MongoDB atlas and installing MongoDB v 4.4.0 on my CentOS 7 VPS with WHM, I faced that issue also.

the run-rs solution does not work for me, but I managed to solve this issue without any third-party tool, following these steps:

1. turn off `mongod`.

the most efficient way is by entering the MongoDB shell with the command mongo checkout the method

db.shutdownServer()

You will be no ability to use the MongoDB server. For me, the shutdown process took too long, and then I killed the process with the command:

systemctl stop -f mongod

if you killed the mongod process,s probably you will need to run mongod --dbpath /var/db --repair

The var/db should point to your database directory.

2. setting replicaSet configuration.

for the replicaSet settings step, check out the /etc/mongod.conf file, look for the replication value line, and you should add the following lines as below:

replication:
   oplogSizeMB: <int>
   replSetName: <string>
   enableMajorityReadConcern: <boolean>

use the replSetName value on the next step.

an example of those settings:

   oplogSizeMB: 2000
   replSetName: rs0
   enableMajorityReadConcern: false

3. add your connection string URL.

add the value of replSetName to your connection URL &replicaSet=--YourReplicationSetName--

if you used the name rs0 from our example, then you should add to your DB connection URL query replicaSet=rs0

4. turn on mongod again

enter the command: systemctl start mongod

5. Access your replicaSet database

enter MongoDB shell with the command mongo, enter the command rs.initiate() now you should be in your replicaSet database.

Solution 2:^[2]

I faced the same issue recently. In my case it's because I'm connecting to a remote Mongo server with a different version than my local development environment.

To quickly solve the issue, I added the following param to my connection string:

?retryWrites=false

Solution 3:^[3]

Possible solution for local development using docker

Create Dockerfile

FROM mongo:4.4.7
RUN echo "rs.initiate();" > /docker-entrypoint-initdb.d/replica-init.js
CMD [ "--replSet", "rs" ]

Build this Dockerfile

docker build ./ -t mongodb:4.7-replset

Run this created image

docker run --name mongodb-replset -p 27017:27017 -d mongodb:4.7-replset

Connect to database using this URI

mongodb://localhost:27017/myDB

Solution 4:^[4]

In order to use transactions, you need a MongoDB replica set, and starting a replica set locally for development is an involved process.

You can use the run-rs npm module. Zero-config MongoDB runner. Starts a replica set with no non-Node dependencies, not even MongoDB.

Or you can simply create an account in MongoDB Atlas which gives you a limited resource MongoDB cluster and so you can run/test your application.

MongoDB Atlas

Solution 5:^[5]

I've been fighting against this issue for weeks. I let you my conclusion. In order to be able to use transactions on a sharded cluster, you need to run at least MongoDB 4.2 on your cluster. If the cluster is not sharded, from 4.0. I was using a library that has as a sub-dependency mongodb NodeJS driver. This driver from version 3.3.x fails against the sharded MongoDB cluster with version 4.0.4. The solution for me was to update my cluster to 4.2 version.

src: https://www.bmc.com/blogs/mongodb-transactions/

Solution 6:^[6]

Works for mongo:5.0.5-focal image.

Dockerfile:

FROM mongo:5.0.5-focal AS rs-mongo

# Make MongoDB a replica set to support transactions. Based on https://stackoverflow.com/a/68621185/1952977
RUN apt-get update && apt-get install patch

# How to create scripts/docker-entrypoint.sh.patch
# 1. Download the original file:
#    wget https://github.com/docker-library/mongo/raw/master/5.0/docker-entrypoint.sh
#    ( wget https://github.com/docker-library/mongo/raw/b5c0cd58cb5626fee4d963ce05ba4d9026deb265/5.0/docker-entrypoint.sh )
# 2. Make a copy of it:
#    cp docker-entrypoint.sh docker-entrypoint-patched.sh
# 3. Add required modifications to docker-entrypoint-patched.sh
# 4. Create patch:
#    diff -u docker-entrypoint.sh docker-entrypoint-patched.sh > scripts/docker-entrypoint.sh.patch
# 5. Clean up:
#    rm docker-entrypoint.sh docker-entrypoint-patched.sh
COPY scripts/docker-entrypoint.sh.patch .
RUN patch /usr/local/bin/docker-entrypoint.sh docker-entrypoint.sh.patch
RUN mkdir -p /etc/mongo-key && chown mongodb:mongodb /etc/mongo-key

CMD ["--replSet", "rs", "--keyFile", "/etc/mongo-key/mongodb.key"]

scripts/docker-entrypoint.sh.patch:

--- docker-entrypoint.sh    2022-01-04 15:35:19.594435819 +0300
+++ docker-entrypoint-patched.sh    2022-01-06 10:16:26.285394681 +0300
@@ -288,6 +288,10 @@
    fi

    if [ -n "$shouldPerformInitdb" ]; then
+
+     openssl rand -base64 756 > /etc/mongo-key/mongodb.key
+    chmod 400 /etc/mongo-key/mongodb.key
+
        mongodHackedArgs=( "$@" )
        if _parse_config "$@"; then
            _mongod_hack_ensure_arg_val --config "$tempConfigFile" "${mongodHackedArgs[@]}"
@@ -408,7 +412,14 @@
        set -- "$@" --bind_ip_all
    fi

-   unset "${!MONGO_INITDB_@}"
+  echo 'Initiating replica set'
+  "$@" --logpath "/proc/$$/fd/1" --fork
+  echo 'rs.initiate({"_id":"rs","members":[{"_id":0,"host":"127.0.0.1:27017"}]});' | mongosh -u "$MONGO_INITDB_ROOT_USERNAME" -p "$MONGO_INITDB_ROOT_PASSWORD"
+  "$@" --logpath "/proc/$$/fd/1" --shutdown
+  echo 'Done initiating replica set'
+
+  unset "${!MONGO_INITDB_@}"
+
 fi

 rm -f "$jsonConfigFile" "$tempConfigFile"

docker-compose.yml:

version: '3.9'

services:
  mongo:
    image: rs-mongo:current
    restart: always
    env_file:
      - .env
    ports:
      - 127.0.0.1:27017:27017
    volumes:
      - mongo-db:/data/db
      - mongo-configdb:/data/configdb
      - mongo-key:/etc/mongo-key

volumes:
  mongo-db:
    driver: local
  mongo-configdb:
    driver: local
  mongo-key:
    driver: local

UPDATED: 6th of Jan, 2022

Solution 7:^[7]

When running MongoDB on a Linux Machine, you can simply use replication by updating connection string via editing service file

/lib/systemd/system/mongod.service

and update it with following

ExecStart=/usr/bin/mongod --config "/etc/mongod.conf" --replSet rs0

where --config "/etc/mongod.conf" is pointing to your MongoDB Configuration file and --replSet rs0 is telling it to use replication with the name of rs0

and then restart

sudo systemctl daemon-reload     //<--To reload service units
sudo systemctl restart mongod    //<--To Restart MongoDB Server

and then initiate replication through your mongod instance in terminal

$ mongosh
$ rs.initiate()

Sources

This article follows the attribution requirements of Stack Overflow and is licensed under CC BY-SA 3.0.

Source: Stack Overflow

Solution	Source
Solution 1
Solution 2	Ricky
Solution 3	Syao May
Solution 4	Mohammad Rajabloo
Solution 5	M. Gleria
Solution 6
Solution 7	Airy

'Mongodb v4.0 Transaction, MongoError: Transaction numbers are only allowed on a replica set member or mongos

Solution 1:[1]

1. turn off mongod.

2. setting replicaSet configuration.

3. add your connection string URL.

4. turn on mongod again

5. Access your replicaSet database

Solution 2:[2]

Solution 3:[3]

Solution 4:[4]

Solution 5:[5]

Solution 6:[6]

Solution 7:[7]