'Command not found - Oh-My-Zsh

I recently installed zsh and oh-my-zsh in my Mac. Now when I try to run a maven command from the terminal, I am getting the following error.

$ mvn install
zsh: command not found: mvn

I have installed Apache maven in /Applications directory. Currently my .zshrc file looks like below.

plugins=(git brew pip mvn mysql-macports python sublime tmux osx)

# ####################
# Maven Config Options
# ####################
export M2_HOME=/Applications/apache-maven-3.3.3
export PATH=$PATH:M2_HOME/bin

As seen above, I appended location of maven installation to the path. But I am still getting errors. Any help is appreciated.

Solution 1:^[1]

Just add:

source ~/.bash_profile

to .zshrc

Solution 2:^[2]

I had a similar problem after installing oh-my-zsh, but for adb command. Looks like the PATH is shortened when oh-my-zsh is installed. I solved it using following steps.

Open the .zshrc file
```
sudo nano ~/.zshrc
```
Look for # User configuration

Un-comment the following line:
```
export PATH="/usr/bin:/bin:/usr/sbin:/sbin:$PATH"
```
Save the file.
source ~/.zshrc

Give this one a try for other similar command not found errors.

Solution 3:^[3]

Try below steps:

Open terminal and run command vi ~/.zshrc

Add below lines in file:

export M2_HOME=/Users/<username>/Downloads/apache-maven-3.6.3 
export PATH=${M2_HOME}/bin:${PATH} 
export PATH

Save file successfully

Open another terminal instance & run command mvn -version

It should work!

Solution 4:^[4]

First, as 4ae1e1 pointed out, you missed the $ in PATH=$PATH:M2_HOME/bin
Second, don't forget to run source ~/.zshrc to take the settings into effect instantly.

Solution 5:^[5]

As mentioned by @4ae1e1 in his comment, $ have to be added before M2_HOME while referring it in the PATH variable, as follows:

export M2_HOME=/Applications/apache-maven-3.3.3
export PATH=$PATH:$M2_HOME/bin/

Once added, as others suggested, source the ~/.zshrc file.

Solution 6:^[6]

Step 1: open zshrc file

sudo nano ~/.zshrc

step 2: add 'mvn' in plugins section

plugins=(git zsh-autosuggestions mvn)

step 3: add maven configuration in zshrc file. (make sure your apache maven extract directory. I have extracted in /opt folder)

# Maven Config Options
export M2_HOME=/opt/apache-maven-3.8.4
export M2=$M2_HOME/bin
export PATH=$M2:$PATH

step 4: save the chnages

ctrl+o
ENTER
ctrl+z

Step 5: reload zshrc file

source ~/.zshrc

Step 6: go to terminal and verify

mvn -v

Output :

Apache Maven 3.8.4
 Maven home: /opt/apache-maven-3.8.4
 Java version: 11.0.11, vendor: Ubuntu, runtime: /usr/lib/jvm/java-11- 
 openjdk-amd64 Default locale: en_IN, platform encoding: UTF-8 OS name: 
 "linux", version: "5.4.0-89-generic", arch: "amd64", family: "unix"

Solution 7:^[7]

I faced the exact same issue, this is what worked for me:

sudo nano ~/.zshrc

add this:

export PATH=your maven path/apache-maven-3.6.3/bin:/usr/bin:/bin:/usr/sbin:/sbin

Ctrl+X, select "Y", Press Enter
source ~/.zshrc
Validate: mvn -version

Solution 8:^[8]

On macOS, you can add the following to your .zshrc file.

If you have not, download maven from https://maven.apache.org/download.cgi

# Maven
export PATH=/opt/apache-maven-3.8.3/bin:${PATH} # you could have it in a different directory

To edit .zshrc, you can use an existing text editor such as vim.

$ cd ~
$ vim .zshrc

Use i to insert the export statements. Once inserted, use escto exit insert mode. Then use :wq! to save and quit the editor. Finally, source the file to see the effects of your new changes.

$ source .zshrc

Now try mvn and you should see something like this.

[INFO] Scanning for projects...
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time:  0.049 s
[INFO] Finished at: 2021-10-11T13:34:20-05:00
[INFO] ------------------------------------------------------------------------
[ERROR] No goals have been specified for this build. You must specify a valid lifecycle phase or a goal in the format <plugin-prefix>:<goal> or <plugin-group-id>:<plugin-artifact-id>[:<plugin-version>]:<goal>. Available lifecycle phases are: validate, initialize, generate-sources, process-sources, generate-resources, process-resources, compile, process-classes, generate-test-sources, process-test-sources, generate-test-resources, process-test-resources, test-compile, process-test-classes, test, prepare-package, package, pre-integration-test, integration-test, post-integration-test, verify, install, deploy, pre-clean, clean, post-clean, pre-site, site, post-site, site-deploy. -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/NoGoalSpecifiedException

Solution 9:^[9]

I think the answers above are too deep. It could be that the person does not have Maven installed on their Local PC. So please run the command below on your terminal

brew install maven

Afterwards on your IntelliJ or the terminal where the project is located run the command

mvn clean install

Use the command to double check if it was installed mvn --version

Solution 10:^[10]

vi ~/.zshrc

add source ~/.bash_profile to ~/.zshrc file, after the line source $ZSH/oh-my-zsh.sh

open up a new terminal tab and execute mvn, and it will start working.

Solution 11:^[11]

I had the same issue. So created .zshrc file and added below in that file. export M2_HOME=/Users/gandharavmehra/Desktop/Development/Tools/apache-maven-3.6.3 export PATH=$PATH:$M2_HOME/bin

after this gandharvmehra@MacBook-Pro ~ % source ~/.zshrc

close the Terminal and open again

gandharamehra@MacBook-Pro ~ % mvn -version Apache Maven 3.6.3 (cecedd343002696d0abb50b32b541b8a6ba2883f)

it should work 100 percent

Solution 12:^[12]

Combining other answers I got adb working on mac and zsh appending these two path lines to .zshrc:

# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH
# this are for Android Studio adb:
export PATH=~/Android/sdk/tools:$PATH
export PATH=~/Android/sdk/platform-tools:$PATH

Solution 13:^[13]

Actually, .bash_profile is for /bin/bash shell, for your /bin/zsh shell, the file is called .zprofile, you should do the same thing in .zprofile as in .bash_profile

Solution 14:^[14]

I have similar issue today with mvn command not found

In my example problem was with incorrect path - I missed one / at the beginning of the path

.zshrc before change: export MAVEN_HOME=home/user/Tools/apache-maven-3.6.3 export PATH=$MAVEN_HOME/bin:$PATH
good to verify if maven path exists. In my case it was error using command below ls $MAVEN_HOME
.zshrc after fix one line export MAVEN_HOME=/home/user/Tools/apache-maven-3.6.3 export PATH=$MAVEN_HOME/bin:$PATH
reload .zhsrc source .zshrc
mvn command found

Solution 15:^[15]

If you are running Catalina you will face this problem often.

Open your terminal
Just copy all your Path variables and create a .zshrc file (touch .zshrc)
open it (open ~/.zshrc) and paste them there,
save and refresh your .zsrhc file ( source ~/.zshrc).

I found this Video very helpful to solve related problems.

Solution 16:^[16]

Install Maven on Mac OS. Download the latest version from the Apache Maven site and select the Maven binary tar.gz file, for example, apache-maven-3.8.4-bin.tar.gz.

Then we extract the archive to our desired location.

Adding Maven to the Environment Path

First, let's open the terminal and switch to the directory where the files were extracted to and then log in as superuser or use below commands with sudo.

Second, we need to remove the tar.gz archive:

rm Downloads/apache-maven*bin.tar.gz

Third, we have to fix the permissions and switch the Maven contents:

chown -R root:wheel Downloads/apache-maven*

mv Downloads/apache-maven* /opt/apache-maven

Then, let's archive the Admin session and add Maven binaries to the path and append:

exit

nano $HOME/.profile

export PATH=$PATH:/opt/apache-maven/bin

Finally, we use Ctrl+x to save and exit from nano.

To load the new setup, let's run:

bash Now, we test if Maven is installed successfully using the command below:

mvn -version

We are now ready to use Maven on our Mac OS.

Reference : How to Install Maven on Windows, Linux, and Mac

Solution 17:^[17]

If you're on a mac you can use Homebrew to install maven and all it's paths Use:

brew install maven

Solution 18:^[18]

step 1:

vim ~/.zshrc

step 2:(Add at the end of the file)

source ~/.bash_profile;

step 3 : (Save changes in Vim)

 :wq!

step 4:(Execution shell)

> source ~/.bash_profile

Solution 19:^[19]

Best solution work for me

Open Finder-> go to folder /Users/ /usr/local/bin

open .zshrc with TextEdit

.zshrc is hidden file so unhide it by command+shift+. press

delete file content and type

export PATH=~/usr/bin:/bin:/usr/sbin:/sbin:$PATH

and save

now

zsh: command not found Gone

Sources

This article follows the attribution requirements of Stack Overflow and is licensed under CC BY-SA 3.0.

Source: Stack Overflow

Solution	Source
Solution 1	Sá´€á´ Oná´‡á´Œá´€
Solution 2	Yogesh Umesh Vaity
Solution 3	whoami - fakeFaceTrueSoul
Solution 4	mainframer
Solution 5	Arpit Aggarwal
Solution 6	Amir Shaikh
Solution 7	Paul Roub
Solution 8
Solution 9	Emmanuel Spencer Egbuniwe
Solution 10	Pavithra Gunasekara
Solution 11	Gandharv Mehra
Solution 12	Pedro Gonzalez
Solution 13	Arghya Sadhu
Solution 14	tarkos
Solution 15	Godwin Tusime
Solution 16	Amit Nayak
Solution 17	Pavel Paddubotski
Solution 18	Janet gutmont
Solution 19	9to5ios

'Command not found - Oh-My-Zsh

Solution 1:[1]

Solution 2:[2]

Solution 3:[3]

Solution 4:[4]

Solution 5:[5]

Solution 6:[6]

Solution 7:[7]

Solution 8:[8]

Solution 9:[9]

Solution 10:[10]

Solution 11:[11]

Solution 12:[12]

Solution 13:[13]

Solution 14:[14]

Solution 15:[15]

Solution 16:[16]

Solution 17:[17]

Solution 18:[18]

Solution 19:[19]